Difference between revisions of "SSH encrypt and decrypt"

Revision as of 20:31, 19 November 2019

Tutorial on how to encrypt and decrypt small messages using Secure Shell keys

Why?

For example,
when You have to send someone a password and sending it over internet in plaintext is out of the question.

Tutorial on how to send Yourself a secret message

The keys

Everyone who uses Secure Shell (SSH) has an easy access to accompanying Secure Shell keys. When You do not have them, then You generate them.

All it takes is Linux, MacOS command line or Cygwin shell in Windows. A minute or two of Your time and few sips of tea. Done.

One can make simple passwordless RSA key-pair with ssh-keygen utility like this:

linux:/home/user> ssh-keygen -t rsa -b 4096
Generating public/private rsa key pair.
Enter file in which to save the key (/home/user/.ssh/id_rsa): 
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved in /home/user/.ssh/id_rsa.
Your public key has been saved in /home/user/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:seDs6vDo55WegAZnG/mr8S+sgz2kvJFCc1wAGsHyB2c user@linux
The key's randomart image is:
+---[RSA 4096]----+
|+o..             |
|oo. E            |
|o. + .. .        |
|  o.oo . o       |
|.o=+  o S        |
|.+== . .         |
|oB*.o +          |
|+o=*+* .         |
| o*OBo+          |
+----[SHA256]-----+

The process above creates 2 files id_rsa id_rsa.pub and places them into subfolder .ssh relative to Your home directory.

The contents of the public key id_rsa.pub should be like this:

ssh-rsa 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 user@linux

To encrypt

Now You have Your pair of keys, the public one id_rsa.pub to encrypt and the private one id_rsa to decrypt.

Create the message

Take Your favorite text editor and create short text file message.txt with some content like:

This is very serious short message.
That will be encrypted.
And decrypted.

Prepare Your public key for encryption

One drawback or discouraging step for encryption is that Your public key is not usable as is.

To be usable with openssl utility it has to be in PKCS8 format.

Public key can be converted to PKCS8 format with ssh-keygen utility like this:

linux:/home/user> ssh-keygen -f ~/.ssh/id_rsa.pub -e -m pkcs8 > id_rsa_pub.pkcs8

The contents of such converted key should be like this:

-----BEGIN PUBLIC KEY-----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-----END PUBLIC KEY-----

Encrypt the message

Now You can encrypt Your super secret message with converted public key like this:

linux:/home/user> cat message.txt | openssl rsautl -encrypt -pubin -inkey id_rsa_pub.pkcs8 > message.enc

In above example we send the contents of message.txt file to openssl utility that uses converted public key id_rsa_pub.pkcs8 and then we store the output in file message.enc

To decrypt

To decrypt the encrypted message file message.enc we use openssl utility like this:

linux:/home/user> cat message.enc | openssl rsautl -decrypt -inkey ~/.ssh/id_rsa
This is very serious short message.
That will be encrypted.
And decrypted.

In above example the contents of decrypted message are show in startard output.

To save decrypted contents one can modify the command like this:

linux:/home/user> cat message.enc | openssl rsautl -decrypt -inkey ~/.ssh/id_rsa > message.txt

Real world

In real world, when You have to pass someone sensitive small message, like a password

1. You ask that someone to send You their public key
   • If that public key is not already in PKCS8 format then You convert it
2. You encrypt Your message with that someone's public key that is in PKCS8 format
3. You send the encrypted message to that someone
4. That someone decrypts Your message with their private key

Contrary to tutorial above Your SSH keys are not needed when You are sending an encrypted message. You only need the other persons public key.

When someone sends You their public key, save it to a file someone.pub. Create Your secret message message.txt. Then do following, firstly to convert the key and secondly to encrypt Your message:

linux:/home/user> ssh-keygen -f someone.pub -e -m pkcs8 > someone_pub.pkcs8
linux:/home/user> cat message.txt | openssl rsautl -encrypt -pubin -inkey someone_pub.pkcs8 > message.enc

And send the output message.enc as a file to that someone. That person then does following and reads the message content from standard output:

linux:/home/someone> cat message.enc | openssl rsautl -decrypt -inkey ~/.ssh/id_rsa
This is very serious short message.
That will be encrypted.
And decrypted.

Notes

Message size

This encryption / decryption method is suitable for small messages, messages whose bitlength is smaller than used RSA key length.

If You want to encrypt longer messages or some big file(s) then the above method can be used for passing on encrypted passwords that are used for file encryption/decryption.

One should use CBC (Cipher Block Chaining) continuous block cipher like AES256 for big file encryption / decryption. openssl utility is able to do that too.

What the path?

~ denotes users home directory, in essence its a shortcut for /home/user

Then ~/.ssh means subfolder .ssh that resides in users home directory /home/user

When using full path the above would be /home/user/.ssh

Private stuff

Your key pair that You generated is Your sensitive security information.

Your public key can be passed on to persons/organizations You know, to authenticate You as sign-on method (go see Gitlab), or it can be used as in above tutorial to encrypt messages. Being "public" does not mean You should openly advertise the contents of that key. It is theoretically possible to re-create private key based on public key, that process takes massive amounts of supercomputer time and is exponentially difficult based on key length. The longer the key the better. There is a tradeoff - longer keys work slower. In above tutorial we used 4096 bit keys that are quite okay by todays (2019) standards.

Your private key should never be shown or given out to anyone. The best practice is to encrypt Your private key with a password. ssh-keygen utility is able to do that like this:

linux:/home/user> ssh-keygen -p -f ~/.ssh/id_rsa
Enter new passphrase (empty for no passphrase): 
Enter same passphrase again: 
Your identification has been saved with the new passphrase.

Martian messages

Obviously encrypted messages are not human readable. If You made a mistake of looking the contents and Your command line went gibberish, issue following command: reset. This resets the terminal and You should see normal command line again.