Main Page

Introduction

Welcome to SoC design wiki. We started this series of labs/projects from 2014 and we are upgrading and fixing problems every year to make it better.

Learning Objectives

By completion of this SoC Design labs, you should be able to:

• Tutorials:
  • Kernel Driver :How to write a simple kernel driver and use it to control a simple IP on ZedBoard.
  • Device Tree: How to introduce new device into on-board Linux’s Device Tree
  • LED blink in VIVADO:
    • Development of simple IPs
    • Integrating IP into the system using AXI bus
    • Controlling the IP from Linux
  • Setup 1 board system for the lab
    • Complex system integration
    • Preparation for project
• Project:
  • component reuse and system improvement
  • Functional test and analysis
  • Work in a team
• Workshop:
  • Introduction to a Network on Chip Simulator
  • Routing algorithms in NoC based systems
  • QoS in NoC based systems

Labs Regulations

Important dates ??.??.2016: Some important event ??.??.2016: Another important event ??.??.2016: Some more important events

Lab grading policy First Tutorials are mandatory Contribution to project: 70% work division in groups and quality of results self assessment peer assessment Attendance: 30%

Contact Us

In case of any questions, please contact us:

• Karl Janson
• Siavoosh Payandeh Azad

Lab Tutorials

• Lab 1
• Lab 2
• Lab 3

Labs additional readings

We keep the design material for the labs at moodle. However the additional reading and more information about the labs can be found here:

• Lab1 additional material
• Lab2 additional material
• Lab3 additional material

Labs known issues

Please add related issues to each lab under the Labs known Issues page.

Tutorial Labs Archive

• 2015 Tutorials
• 2014 Tutorials

Audio Mixer Project

Project Description

Design project is defined in each round for System on Chip design(IAY0550) students with the aim of providing them with real world experience of working on a SoC project, teamwork and project management. This wiki will serve as a platform for students to pass-on their designs and documents to students in the next round of course. Full description of the project can be found Project Description page.

Rules and Regulations

Please read the following page before you start the project:

• Rules and Regulations

Team Organization

The following page is for clear and transparent team organization for design project:

• Team Organization Spring 2014
• Team Organization Spring 2015

Design project parts

The following pages contain data about different parts of the project:

• General
• Amplifier Design
  • Balance Unit
• Audio Interface
  • Buffers Design
• Communication
• External Control Panel
  • Pmod Encoder
• Filter Design
• Web Server

We keep separate pages for special design parts that will be used/shared by different groups:

• Shift and Add Multiplier